Cutting the cord: why wireless charging will finally power up in 2014

19th Jan 2014 | 10:01

Cutting the cord: why wireless charging will finally power up in 2014

Wireless charging's got no strings to hold it down

Wireless power today is mostly about convenience; not having to fish out a cable and get it the right way round when you plug it in. But once it becomes ubiquitous, it will change the way devices are designed; they can have smaller batteries or save space by not needing the power port at all.

This year at CES, as well as seeing the latest wireless power products and the next step in wireless charging technology, we also got some good news on getting more users and businesses on board with wireless power - 2014 will definitely be a big year for wireless charging.

There are over 60 different phones that have Qi wireless charging (the inductive charging standard) built in today - and 40 million of them have been sold - and because it's a standard, you can put your phone down on any Qi charging surface and it will just start grabbing power.

If your phone doesn't have Qi built in, Incipio introduced a line of wireless charging pads and protective cases at CES that add it (including Lumia models like the Nokia Lumia 920 and Nokia Lumia 1520 that have a connector designed to simplify adding a charging case).

Incipio

That surface doesn't have to be a pad on your desk either. It could be a light or a mouse mat: silicon valley startup Kudos Tech had prototypes for both, although no dates for putting them into production yet.

You don't have to only charge a phone; IDAPT has added a Qi charging module to its clever Modulo battery system, which lets you connect up to five external 2000mAh batteries to charge your phone or tablet.

Snap on as many batteries as you need to take with you and drop it onto a wireless charger to keep them topped up before you leave.

Wireless charge IDAPT's Modulo modular battery on its modular wireless charging pad

Or it could be a car cradle (Nokia has a wireless charging cradle already and Tylt was showing off a prototype of its own at CES, with a perpetually sticky surface to hold your phone in place) or a tray built into your car. Both have NFC which can trigger your phone to launch a specific app, like GPS navigation, or pair with the car's Bluetooth automatically when you start charging it.

 Kudos Tech

Car makers like that, John Perzow of the Wireless Power Consortium says, because it will let them take information from your phone – like your personal music collection – and display that on the screen on your dashboard. "They want a path for extending your personal device into the car and shifting some of the load to your phone, but you can only do that if you can charge the device."

Jeep wireless charging

The Jeep Cherokee will have a wireless charging shelf in the 2014 model, Toyota will put it in the Avalon and Prius and the German auto consortium that advises Mercedes, Volkswagen, Audi and BMW is recommending Qi, after a three year study on wireless charging.

We even saw an FAA-approved wireless charger for use on planes; expect to see it in private jets first rather than on your next economy flight though.

Making wireless power resonate

So with a standard like Qi and products already in the market, why is wireless charging still not common?

Perzow says that confusion over standards has been slowing adoption. Yes, there's the Qi standard, but there have been plenty of other wireless charging launches that haven't been part of Qi. Even Qualcomm has its own wireless charging system for electric cars (it charges the motor, not your smartphone, but still, it's something else to confuse people).

The WPC is trying to tackle that by bringing new wireless charging developments into the Qi standard, and we saw some of that at CES.

Today Qi uses near-field coupling, between the coil antenna inside your phone and the one inside the charging mat; you have to either put multiple coils in or rely on people lining up devices in just the right spot.

 A resonant charging pad under two laptops delivers power to the phone

The latest Qi mats give you a little more freedom of movement but to be able to put devices down anywhere on the surface and to be able to fit the charging pad underneath a thick surface like a table or a kitchen worksurface requires the next technology to be included in the Qi standard, magnetic resonance.

Resonant charging lets you put the phone off to one side of the charging spot or have something else in the way and still get charge.

We saw a new charger from Convenient Power that has resonant charging that's fully backwards compatible with Qi, so we were able to stack two notebooks on the charger and put a Nokia Lumia on top of them and have it charge. Bolt the pad under a table and you can charge through the surface.

Convenient Power also showed us a five-device charger that automatically detects the power requirements of the phones and tablets you put on it and delivers the right charge, and again you don't need to worry about lining them up neatly.

Convenient Power

New Zealand wireless power experts PowerByProxi also creates resonant chargers, although it will licence its designs to other companies rather than selling them directly like Convenient Power. Phones will need to have a new charging antenna but they'll still charge on older Qi pads.

The big advantage of the PowerByProxi system is that it puts devices in charge of setting the power level they need, and it can send different power levels to different devices. That means your almost-flat tablet can get lots of power instead of just the trickle of power needed to top up your almost-fully-charged phone

Getting new developments into a backwardly compatible standard like this is vital if we want to see wireless charging on offer at Starbucks and every hotel the way wireless networking is – something that would really make wireless power ubiquitous and something Perzow is working on.

"Infrastructure has been stalled because it's a very conservative market. A hotel wants maximum usability and long life before they're going to put this on every night stand. There needs to be an experience that adds value beyond charging," he says.

The new chargers that can be bolted under tables without having to chisel out a slot will help, as will more freedom of positioning. "You just put the phone down on the charger; you don't have to get the placement just right."

And so will management software that shows which devices are sitting on a table, charging, and whether the power is getting through to them properly. Making wireless power easy to fit, easy to support and easy to use could be what we need to see it everywhere in the next couple of years.

wireless charging mobile phones wireless phonescarousel-en-gb
Share this Article
Google+
Edition: UK
TopView classic version