How to overclock your Intel CPU

3rd Oct 2010 | 07:00

How to overclock your Intel CPU

Get more performance from your Intel Core processor

Overclock your Intel CPU: Introduction

Back in the days when the average desktop PC was barely capable of running a word processor, let alone sumptuous 3D games, the idea of overclocking your CPU in order to get thousand pound performance from a three hundred pound chip wasn't just an indulgence, it was a necessity.

A lot has changed. A modern multi-core CPU has a much longer shelf life than its forebears, because performance today is as much a factor of the number of cores and microcode as it is raw clockspeed.

An Intel Q6600 bought four years ago is unlikely to feel sluggish for most games, although upgrading isn't expensive these days either. For the not-unreasonable outlay of £150 you can pick up anything from the latest Lynnfield chips through to a six-core monster from AMD. But that's hardly the point.

Dropping £150 is still £150 out of your pocket, and the basics remain the same: Why buy a new or more expensive chip when you can save some serious dough and overclock? Besides, it's also a lot of fun.

The techniques involved in CPU overclocking have remained largely unchanged since the dark ages of computing too. Take control of the clocks, take care of the extra heating produced, and before you know it you'll be eyeing up the cost of liquid nitrogen.

It's true that most CPU architectures have a cap beyond which they simply won't perform – but the good news is that for current Intel processors, 4GHz or more is easily possible using air-cooling techniques alone.

Your CPU's clock speed is derived by taking the 'base clock': a signal supplied by the clock generator on the motherboard, and applying a 'multiplier' to it.

On newer P55 or X58-based motherboards, the base clock is always 133.33MHz by default; for Core 2 or older CPUs, the base clock varies between 100MHz and 166.6MHz depending on the Front Side Bus. The important thing to remember is that the CPU speed is defined by this external influence; it doesn't just operate from a single internal signal that only it has total control over.

Question of multipliers

If you are the owner of an 'Extreme Edition' chip or one of the new K-series models, then you can select what the multiplier will be. That means if you have a Core i7 980X running at 3.33GHz (133MHz base clock x25 multiplier) you can overclock it to 4GHz just by increasing the multiplier to 30.

If you don't have an unlocked chip (like the vast majority), the multiplier will be a fixed value or, in the case of the Core i7 and i5 CPUs we've seen, you'll have a restricted set of options in the BIOS to reduce the multiplier or apply a very small overclock. That means to do any serious acceleration of your CPU you'll need to increase the base clock itself, and that's where your choice of motherboard is all-important.

Essentially, you'll need to alter the base clock in the BIOS, something that most motherboards now offer as a matter of course. This same clock is used by the other buses in your machine though, including the PCI-e bus that your graphics card is sat on.

This means that those components need to be either well-cooled, so that they can run to keep up as the base clock is accelerated, or you'll need to be able to 'decouple' them in the BIOS and leave them running at their stock speeds regardless of the base clock setting.

We're going to be using an MSI P55-GD65 for our walkthrough. It's a solid board that sneaks in at less than £100 and opens up all the important BIOS settings for us. If you aren't confident fiddling around in the BIOS, it has extra buttons for increasing clockspeeds across the board or automatically finding a modest but stable overclock.

Which chip to choose?

To play around with Intel overclocking, any one of Intel's Core 2, Core i5 or Core i7 processors are a great place to start.

Arguably the best choice right now is the Core i7 920, a 2.66GHz chip that will crank up to a good 4GHz and has a triple channel memory controller to help the data flowing from the system RAM to keep up with it.

There are some drawbacks, though. For a start, you'll need an expensive X58-based mobo, as well as at least three sticks of RAM. More critically, the 920 has a locked memory multiplier, which means there's an extra level of fiddling with memory base speeds to keep your system stable.

Instead, we're using a Core i7 870 to show you how to get the most from an Intel-based system. The chip itself is quite pricey, but the accompanying socket-1156 mobos are reasonable and you can decouple the memory timings while finding the fastest stable speed for your processor.

The successor to the 870, the Core i7 870K, is the same chip but cheaper and with an unlocked CPU multiplier, which means it's even easier to overclock.

To achieve stability you'll need to balance the base clock, the multiplier and the amount of voltage supplied to the CPU and the QPI system interface. Every chip is different, and you may find a high base clock with a low multiplier works better than a low base clock and a high multiplier, or vice versa.

Overclock your Intel CPU: Step by step

1. Cool-hand

Gelid tranquillo

You can get decent overclocks out of most Intel CPUs using the stock cooler, but getting to 4GHz is going to require getting a little more serious.

Gelid's Tranquillo is a quality slice of cooling action, which recently got the nod from us. It's a bargain at only £25. You'll also want some quality thermal paste, too.

2. Cold box

Step 2

Over at records site, enterprising individuals have pushed the 870 to 5.7GHz, albeit with liquid nitrogen cooling.

We're going to be going down the water cooling route here though, using CoolIT's ECO ALC self-contained unit. It's simple to fit and doesn't require any maintenance once on.

3. Enter the BIOS

Step 3

Run a few benchmarks to get an idea of the basic speed of your machine, then reboot and hit [Del] to enter the BIOS. Our MSI motherboard lists all of its key timing options in the 'Cell' menu. The three key ones are 'Adjust CPU base frequency' (the base clock), 'Adjust CPU ratio' and 'CPU voltage'.

4. Hitting the multiples

Step 4

Our Core i7 870 multiplier can be raised from 22 to 24 easily enough in the BIOS, so that's an easy and good place to start.

Save the changes and exit the BIOS and see if you can boot in to Windows at the higher clockspeeds. If that appears to be working fine, then reboot and go back into the BIOS.

5. Hertz me

Step 5

Raise the base clock by 10MHz and then boot into Windows to check for stability. If all is fine, go back into the BIOS and repeat the process until you can't boot.

At this point, you may find your CPU needs a bit of extra power to cope, so increase the CPU Voltage by 0.1V and test for stability again.

6. Volt by volt

Step 6

If you're still facing problems, either increase the voltage a bit more (values are colour coded for risk of CPU damage) or try dropping the multiplier and increasing the base clock to go faster.

You may need several attempts to balance the three settings. Intel chips are fairly robust, but watch your voltage.


First published in PC Format Issue 244

Liked this? Then check out Best processor for desktop PCs

Sign up for TechRadar's free Weird Week in Tech newsletter
Get the oddest tech stories of the week, plus the most popular news and reviews delivered straight to your inbox. Sign up at

Follow TechRadar on Twitter * Find us on Facebook

tutorial overclocking Intel processors
Share this Article

Most Popular

Edition: UK
TopView classic version